Sunday, 13 December 2015

Adam ceiling, smoking room

While the glue is setting on my grand stairs, I decided to continue my project of making new ceilings using Adam paper. It is not without trepidation I approached this task because, unlike the Grand Hall that didn't have any ceiling decoration (and was hard enough), in order to insert new ceilings in existing, assembled rooms I will need to perform the following operations:
1) remove all objects from the room I will be working on
2) remove coving (in this situation, I am glad that I use paper rather than wood)
3) remove existing ceiling paper or decoration
4) remove flooring in the room above (which may involve removing skirting) to access fixture for ceiling light
5) remove ceiling light
6) glue new ceiling paper onto a piece of lining, making sure that the new ceiling rose is aligned with the existing hole for the ceiling light (this may also involve cutting and pasting, to assemble a new pattern, as I had to do with the ceiling in Grand Hall)
7) glue new ceiling assembly onto the ceiling - working upside down in a small room. For this step you should preferably be an octopus
8) fix the ceiling light, feeding the wire through the hole up to the room above
9) replace flooring in the room above, including skirting
10) insert new coving in the room I am working on
11) put all objects back into the room

If you wonder why I bother it's because I am a perfectionist. Now that I have this magnificent paper I am no longer satisfied with my old ceilings.

I started with the smoking room for no particular reason; probably because the old ceiling was slightly damaged when we did the lights. 

I will not show step-by-step pictures because, apart from being tremendously difficult, it was straightforward (except that it was painful to see the room stripped down again). The only unforeseen trouble was that in a corner there was a wire connector that my son-in-law would have been able to remove and re-connect, but I didn't dare, so I had to cut a little square. Unless you look closely you won't notice. Here is the result:


It took me three hours, but luckily I didn't have to tear up the room above because I still have paper floors there which could be carefully lifted.

With objects put back:




Having lights inside the room was a huge advantage, although otherwise it would have made sense to fix the ceiling before the lights. But I didn't have much choice.


2 comments:

  1. Oh my, I am tired just thinking about it. But I can understand why, job beautiful done

    ReplyDelete
  2. What a stunning room this has turned out to be. The ceiling is beautiful.

    ReplyDelete